Royal Enfield Continental GT Owner'S Manual Download Page 72

Page: 72 / 122

PREPARING THE MOTORCYCLE FOR REUSE

Remove anti rust solution from all chrome
plated parts and clean the motorcycle.

Inflate the tyres to the correct tyre pressure.

Ensure battery is fully charged and electrolyte
level is properly maintained.

Connect the battery.

Lubricate all control cables and pivots.

Check level of oil in engine and top up if
necessary.

Fill fuel tank with fresh petrol.

Check fuel line for any cracks or cuts.

Clean the air filter.

Remove plastic covering from the silencer.

Remove spark  plug on cylinder head  and pour
in  a  few  drops  of  engine  oil.  Crank  engine  a
few times to lubricate cylinder walls and piston.
Clean  spark  plug  and  refit.

Switch “ON” the ignition switch.

Start vehicle and warm up engine for a few
minutes before riding the vehicle.

NOTE :

Do not raise the engine rpm the moment it is started,
but allow the engine to run at Idling speed.

CAUTION :

Proper long-term storage is important for the safe,
tr ouble-f r ee operation of your Royal E nf ield
motorcycle.

Storage Precautions

Summary of Contents for Continental GT



























































































































Search results

Summary of Contents for Continental GT

Reviews:

Related manuals for Continental GT

Brands by name

Popular brands

Royal Enfield Continental GT, Owner'S Manual

Search results

Summary of Contents for Continental GT

Reviews:

Related manuals for Continental GT

Brands by name

Popular brands