Royal Enfield Bullet 500, Owner'S Manual

Page: 49 / 118

48
Place a 4 mm thick wooden piece or cardboard
sheet between the brake pads to avoid pads
activation in the event the front brake lever is
accidently pressed.
FRONT WHEEL ASSEMBLY
Remove the wooden piece / card board sheet
placed between the brake pads.
Tap and remove the front wheel spindle
Tilt the vehicle to RH Side and take out the wheel
along with speedo drive with bush & LH side spacer.
MINOR MAINTENANCE TIPS
CAUTION
Do not press the front brake lever when wheel is
removed as this will result in the brake pads coming
too far out of the brake caliper.
Take out Speedo drive
and bush on the RH
side as shown in pic.
Place the bush
sp eedo dr ive in
position and place
speedo drive over it.
Insert the wheel
alo ng wit h speedo
drive assembly and
LH spacer between
the front fork ends
ensuring the brake
di sc i s lo cated in
between the brake
pads.
Ins ert and tap the
fr ont wheel ax le
gently inside.
Refit the washer and
tighten the nut firmly.