k)
Do not clean the appliance with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
DISPOSAL OF WASTE APPLIANCES
At the end of its service life, this product must not be disposed of with mixed
household waste; return it to a collector/recycler of waste electrical and electronic
equipment. This is shown by the symbol placed on the product, the user manual
or the packaging. The materials used in the appliance can be reused according to
their classification identifications. By reuse, recycling or applying other forms of
use of waste appliances, you make a significant contribution to the protection of
our environment.
Local administration will provide you with the information about the nearest
disposal locations for the appliance.
TROUBLESHOOTING
Problem
Possible cause
Action
Error code “UH”
Incorrect supply voltage.
Verify the supply voltage is
correct.
Error code “UL”
Error code “JJJ”
Stirring chamber icing
protection tripped. The ice
will take 5 minutes to thaw.
Wait until this process is
complete.
Error code “CCC”
The dispensing lever is held
to open the dispenser for
more than 1 minute.
Switch the dispensing lever
to close the dispenser.
Power cycle the appliance.
The appliance will
not turn on.
Incorrect connection to the
mains.
Check the appliance’s
connection to the mains.
The refrigerating
system will not run.
Incorrect supply voltage.
Check the supply voltage.
The appliance will
not refrigerate.
The refrigerating system has
failed.
Contact the manufacturer’s
service.
The stirrer(s) will not
stop once the batch
has been processed.
Refrigerating system /
relevant control panel key
malfunction.
Contact the manufacturer’s
service.
The batch cannot be
dispensed.
The batch level is too low /
the refrigerating chamber
ducts are obstructed
Refill with enough batch /
disassemble and clean the
appliance parts.
The preprocessed
batch is too thin or
thick.
Incorrect settings / the
stirrer drive unit has failed.
Verify the settings / Contact
the manufacturer’s service.
The preprocessed
batch is leaking.
Incorrect assembly of the
appliance parts.
Verify the appliance parts
for correct assembly.
Summary of Contents for RCSI-16
Page 133: ......
