8. Secure roof to walls
Secure the roof to the walls using 8 x 50mm screws along each long edge and 6 x 50mm screws along each short edge. Screw through the roof panels into the top frame
of the walls.
50mm
50mm
ro
of centr
e block
50mm
Cross section of wall
50mm
7. Roof centre block
Position the roof centre block in the hole in the middle, ensure it is flush with the roof panel framing and secure in place using 4 x 50mm screws. Screw through the frames
of the rectangular roof panels into the centre block ,as shown below. Drill 4 holes in the roof inside cover piece, centre the cover piece over the centre roof block and
secure in place using 4 x 50mm screws, screw through the pre-drilled holes of the cover piece into the centre block.
3mm
Drill
Overhead view
50mm
50mm
Roof panel frame
Wall panel top frame
Note how the roof panels fit over
the Wall panel top frame
Ensure all the panels rest
against each other evenly
as they are screwed
together.
View of roof from inside the building
Cross section of wall
6. Roof
Have 1 person standing in the centre of the assembly to hold the panels while another person lifts them on. Hook the roof framing over the top frames and evenly rest
the panel edges against each other. Ensure the corner frames are square and level and secure using 2 x 50mm screws per corner as shown.
