Sides panels
Back panels
Sides panels
It is recommended to drill pilot holes with a
4mm drill bit for all screws in this section.
Back panel
Side panel
50mm
Panel frames
rest on floor.
Panel cladding
overhangs floor
edge.
50mm
Front panels
3mm
Drill
2.Wall panels
Position a back panel and a side panel on the floor as shown. Note how the panel frames sit on the floor with the panel cladding overhanging the floor edge. Ensure square
and secure using 3 x 50mm screws, screw through the frame of the side panel into the frame of the back panel. Position the small back panel next to the first, ensure level
and secure them together using 3 x 50mm screws, screw through the frame of the first panel into the frame of the second. Continue adding the rest of the panels as
shown in the diagrams using 3 x 50mm screws per join.
50mm
50mm
1. Floor section
Prepare a level area for the Summerhouse to sit. Lay the floor panels upside down and secure them together using 5 x 50mm screws per join as shown, Attach 6 treated
wooden or similar bearers of size 75 x 50 x 2340mm (not supplied in kit).
To "VALIDATE" the guarantee, this item should be erected on 75mm x 50mm treated
wooden or similar bearers (These are not supplied with the kit.) Ground contact must
be avoided.
