Rowlinson Garden Products Garden Bar Assembly Instructions Manual Download Page 5

8. Roof Felt

Cut the 4m roofing felt roll into two equal lengths. Place one length over one roof section. At the front and along the lower edge of the roof leave an overhang of felt of at 

least 45mm. Fold down the felt along the lower edge and secure to the felt batten using 20 x10mm felt nails evenly spaced. Tension the felt over the roof and secure along 

the upper edge using 4 x 10mm felt nails. Repeat this for the second piece of felt on the other half of the roof. Once the two pieces of felt are in place take the ridge felt roll 

and place over the apex of the roof making sure it sits centrally over the roof ridge and overlaps the other two felt pieces, attach using 20 x 10mm felt nails evenly spaced, 

along each lower edge of the third felt. Dress down the ends of all felt pieces and attach to the Batten blocks at the front with 8 x 10mm felt nails. At the back secure to the 

apex panel using 6 x 10mm felt nails in the same way. When all the felt is in position trim of any excess.

 9. Door 

Place the door in the door opening. To the outside of the door, fix the three T-hinges to the door with 4 x 25mm screws per hinge. Secure the hinges to the door frame 

using 3 x 25mm screws per hinge. Fit the turn button to the door right door panel using 1 x 25mm screw and then fit the hasp and staple with 7 x 19mm round head screws.

Felt upper edge

Felt upper edge

Felt lower edge

Leave at least 45mm of felt 

overhanging, to fold down and 

cover the felt batten.

 10. Bar shelf coversrips 

On each end of the bar shelf, align a bar shelf end coverstrip and attach each one using 2 x 30mm nails. To the front edge attach the bar front edge coverstrip using 6 x 30mm 

nails. Slot the bar shelf centre coverstrips into the gaps between the two shelf panels. Nail each strip in place using 3 x 30mm nails.

Bar shelf centre

coverstrip

Bar shelf centre

coverstrip

Important note:

All door fittings should be fixed 

to the outside of the door and 

building but aligned with the 

framing of the door.

10mm

Felt

Nails

10mm

Felt

Nails

10mm

Felt

Nails

25mm

25mm

19mm

30mm

30mm

30mm

30mm

30mm

Reviews: