7. Bar shelves
Fit the shelf support rail to the back wall, ensure it is level with the bottom frame of the hatch opening. Secure in place using 1 x 50mm screw at each end, screw through
the fram of the back panel into the ends of the rail.With one bar shelf on the inside of the building and the other on the outside, interlock the two halves through the hatch
panel openings. Ensure both shelves butt up to the panel frame. Push the bar shelf infill frame into the gaps between the shelves and secure each one in place using 2 x 50mm
screws. On the underside of the bar shelf screw the shelf frames together using 4 x 50mm screws per frame. Secure the shelves down using 4 x 50mm screws, screw down
through the shelf frames into the frame of the hatch panels. Ensure the shelves are level and screw 1 x 50 mm screw through the frame of the door panel into the end of the
inside shelf. On the back wall screw up through the shelf support rail into the shelf frame using 2 x 50mm screws.
Bar shelf
infill frame
Bar shelf
infill frame
Drill
3mm
It is recommended to drill pilot holes for
each screw before assembly.
Shelf support rail
Ensure the shelf support
rail is level with the bottom
frame of the hatch opening.
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
50mm
