Document 80-0002, Rev. X6
28
9.5
S
EAT
P
OSITION
S
TRAP
Although the seat positioning strap is an optional accessory for ROWHEELS Revolution 1.0, its use is
recommended to prevent accidental weight shift leading to instability and tipping.
WARNING! Risk of Serious Injury or Damage.
If equipped, always wear your Seat Positioning Strap otherwise it may get entangled with moving
components.
9.6
R
EMOVING THE
R
EAR
W
HEELS
The rear wheels are easily removed by loosening and removing the 9/16” lock-nut on the inside end of
the rear wheel axle. The handrim can be removed from the wheel by removing the 3/4” lock-nut in the
center of the hub cap. Discard the nuts as they may not be reused.
Installation is the reverse using new nuts. Use a torque wrench to tighten the nuts according to the
information in the table below.
Torque (ft-lbs)
Axle to frame nut
26
Hand rim to wheel nut
64
WARNING! Risk of Serious Injury or Damage
DO
NOT reuse old lock nuts. Only new lock nuts should be used for re-asssembly.
