Document 80-0002, Rev. X6
25
Wheel Lock position adjustment
WARNING! Risk of Serious Injury or Damage
After any adjustments, repair or service, and before use, make sure
ALL wheel lock hardware is tightened securely. Failure to do this can
result in Serious Injury.
It is useful to perform these operations on a flat smooth surface.
Disengage the wheel locks by pulling the lever backwards (2).
Loosen the screw (4).
Slide the wheel lock assembly to the rear so that there is a small gap
between the lock post and tire (3).
Tighten the screw (4).
Engage the wheel lock by pushing the lever forward. (1)
Examine the wheel locks to determine if they are effective. If not,
repeat the above steps to tighten them further.
WARNING! Risk of Serious Injury or Damage
If the wheel locks do not effectively hold the wheel chair stationary
when occupied, contact a qualified technician otherwise injury can
occur.
9.2
S
TANDARD
L
EG
R
ESTS
WARNING! Risk of Serious
Injury or Damage
After any adjustments, repair or service, and before use, make sure
ALL fastening hardware is tightened securely. Failure to do this can
result in Serious Injury.
The leg rests can be easily rotated outwards and detached. They may
also be rotated inwards under the seat to allow free leg room around
the chair.
The leg rests are height adjustable. If the wheelchair is used outdoors,
minimum distance between footrests and ground should be 2 inches.
A
3
4
2
