Rowenta 730279, Manual

Page: 13 / 26

10
If your vacuum cleaner does not start
•
•
If the suction of your vacuum cleaner has
dropped, it makes a noise and whistles
•
•
•
•
If the bag full indicator remains red
•
If the fl oor nozzle is hard to move around
•
If the power cable does not rewind
completely
•
If problems persist, take your vacuum
cleaner to the nearest Rowenta approved
Service Centre (see list of approved
service centres) or contact the Rowenta
Customer Service (see contact details on
last page).
*Depending on model : this is either equipment specifi c to certain models or available as an optional accessory.
TROUBLESHOOTING
The appliance is not plugged-in, check that
the appliance is correctly plugged in.
IMPORTANT As soon as your vacuum
cleaner starts to malfunction, and before
performing any checks stop the appliance
by pressing the Start/Stop switch.
An accessory or the tube is clogged. Unclog
the accessory tube or fl exible hose.
The cover was not closed properly: check
that the bag is properly installed and
reclose the cover.
An accessory or the fl exible hose is partially
clogged. Unclog the accessory tube or
fl exible hose.
The bag is full or clogged with fi ne dust. Fit
a new bag or empty the fabric dust bag.
The fi lter is full: change the (H)EPA* fi lter
cassette (ref. ZR 0029 01) and fi t it back into
position.
The bag is full. Fit a new one.
The power cord is slow in re-entering
its housing. Pull the cord out to its entire
length and press on the automatic cord
rewind pedal.
WARRANTY
• •
This product has been designed for
domestic use only. Any professional use,
innapropriate use or failure to comply with
the instructions, the manufacturer accepts
no responsibility and the guarantee will
not apply. Read the instructions for use carefully
before using your appliance for the fi rst
time: any use which does not conform to
these instructions will absolve Rowenta
from any liability.
If there is no suction
If the power control switch (16c) is open :
close the power nozzle power switch.
Open the power nozzle power switch (16c).
EN
730279_RO47_SFupgraded-ERGO_730279 06/01/11 11:11 Page10