25
SAT FINDER
________________________________________________
Press the “HOME” key.
Touch “SAT” and then “SAT FINDER”
or use the encoder.
Satellite locked.
Touch the selected transponder, touch
YES/NO to added or delete from list.
Touch “SAVE & EXIT” to save and exit.
Touch “PARAM” to modify the
transponders list.
Satellite locked.
The SAT FINDER function allow you to check the quality of 4 transponders simultaneity
and to check the operation of the 4 LNB polarities.
If the chosen satellite is found the buzzer will start, if this does not happen, continue looking
for the right satellite. Optimize the dish alignment and skew to obtain the maximum NsMAR
value (noise margin).
NOTE:
For a proper use of the “SAT FINDER” function, verify the tuning parameters for all three
transponders (frequency, polarity, band, and symbol rate) and the type of lnb you are using
(universal or quatro)
Go to the
www.lyngsat.com
site for more information
Summary of Contents for HD TAB 900
Page 81: ...81 NOTE...
