Rover HD PRO TAB, User Manual

Page: 29 / 74

29/74
On the right side, the meter visualizes the A/V content of the first non-encrypted service of the
demodulated signal and provides its Vpid and Apid.
Some miscellaneous information related to the modulation are displayed under the A/V box:
signal carrier mode, constellation type and encryption status.
For terrestrial channels, as for satellite ones, the modulation type is automatically detected by
the meter as soon as it is locked: DVB-T/H, DVB-T2 or Analog TV.
Touching the screen over the Video box, will result in switching the video visualization in full
screen mode and a status bar indicating the Audio and Video encoding format will appear.
Touching the screen on the Vpid and Apid row, will result in switching to the
MPEG SERVICE
LIST screen (see chapter 8 for detailed information). Touching again the Vpid and Apid row,
the meter goes back to the measurement interface.
Touching the screen over measurement bars, or pressing again the
TV button on the keyboard,
will result in switching the view to the second measurement screen.
The second measurement screen contains the constellation diagram and the information
related to the modulation parameters: Code Rate, FEC, Constellation type, etc.
Again, the ZOOM function will let the user to magnify the constellation diagram in a four-
quadrant view to better analyze the diagram points and view TPS carriers.
Touching the screen over the diagram or pressing again the
TV button on the keyboard will
switch the view on the third measurement screen.
If the locked signal is a DVB-T2 one, in this screen the user will also see (as shown above) the
indication of the PLP being demodulated (by default PLP #1) and the PLP-related information
(PLP FEC, PLP constellation, etc). The selection of the PLP to be demodulated, as well as the
Channel Logger function could be easily done via the “MENU&?” contextual menu at the
bottom-right corner of the screen: