Rover HD PRO TAB, User Manual

Page: 17 / 74

17/74
DISPLAY LIGHT: if set on FULL ON, will result in having the maximum brightness of the
screen constantly. When set to 30 seconds, will decrease automatically screen backlight for
battery saving after 30 seconds of inactivity.
BATTERY TEST: this code represents the result of the last battery test executed on the
equipment:
- The first 3 digits (418 in the picture) represents the time necessary to complete the
test, expressed in minutes
- The central 3 digits (100 in the picture) represents the charge status, in percentage
- The 3 last digits (732 in the picture) represents the estimated charge duration in
minutes.
CALIBRATE TOUCHSCREEN:
this option activates the touch screen calibration function.
As soon as you select the option, an empty screen with 4 small squares on the corners of
the screen appears:
Touch each of them to calibrate the meter’s touch screen. After this operation, the meter
comes back to the Home screen.
LAN CONFIGURATION: via this menu is possible to configure the meter’s Ethernet port;
the LAN can be configured in both STATIC and DHCP modes. If in static mode, the user
will be asked for the IP Address, Net Mask and Default Gateway.
At the bottom of the screen is possible also to read the LAN MAC Address.