manualshive.com logo in svg

Rover 75 Saloon, Owner'S Handbook Manual

The Rover 75 Saloon Owner's Handbook Manual is a comprehensive guide that provides detailed instructions on operating and maintaining your vehicle. Ensure a smooth and trouble-free driving experience by downloading this manual for free from manualshive.com. Get the most out of your car with this essential resource.

Share
Download
background image

214

Parts & Accessories

Parts & Accessories

PARTS & ACCESSORIES

The fitting of parts and accessories that have not been approved 
by MG Rover, or the carrying out of non-approved alterations 

or conversions, may be dangerous and could affect the safety of the 
car and occupants, and also invalidate the terms and conditions of 
the car's warranty.

Your car has been carefully designed and manufactured to exude 
luxury, class and style.

To ensure your future driving pleasure and safety, we strongly 
recommend that only MG Rover approved parts are fitted to your 
car. Genuine MG Rover parts and accessories are the only 
components approved by MG Rover to meet rigorous original 
equipment standards for fitment and performance.

To enhance your motoring pleasure, a comprehensive and 
versatile range of quality accessories is available. This wide range of 
genuine MG Rover products is an integral part of the car's design 
and development programme and will help to guarantee 
continued reliability, safety and performance.

An airbag SRS is fitted to your car, ALWAYS consult an MG 
Rover dealer before fitting any accessory.

Genuine MG Rover parts are the ONLY parts built to original 
equipment specifications AND approved by MG Rover designers; 
this means that every single part and accessory has been thoroughly 
tested by the same engineering team that designed and built the 
car. As a result, all genuine MG Rover parts and accessories are 
guaranteed for twelve months, regardless of distance travelled.

It is extremely hazardous to fit parts or accessories where 
installation requires the dismantling of, or addition to, either 

the electrical or fuel systems.

A full list and description of all accessories is available from your 
MG Rover dealer.

Travelling abroad
In some countries, it is illegal to fit parts which have not been made 
to the vehicle manufacturer's specification.

Owners should ensure that any parts or accessories fitted to the car 
while travelling abroad, will also conform to the legal requirements 
of their home country.

Summary of Contents for 75 Saloon






























































































































































































































































































Reviews:

No comments

Related manuals for 75 Saloon

Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Westin 31-0190 Installation Instructions preview
31-0190
Brand: Westin Pages: 2
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
CITROËN Jumpy Miltispace Owner'S Handbook Manual preview
Jumpy Miltispace
Brand: CITROËN Pages: 164

Brands by name

Popular brands

Load more brands