ROUND Pools V35027, Installation Manual

Page: 27 / 37

3
No Diving or Jumping. Observe all Safety Rules
C. INSTALLATION OF TOP LEDGE AND LEDGE COVERS
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
Section
4
1. Install top ledge
a. Place top ledges on the wall. Align the holes on the
top ledges with those on the top plates. Make sure
the space left between each top ledge is uniform
all around and that the space in question can be
covered by a ledge cover. Attach the top ledges to
the top plates using screws (V12x34).
(Image 5)
2. Install ledge covers
a. Place inside ledge cover onto the top plate and
attach it with a screw (V12x34).
(Image 6)
Note:
During assembly, the inner and outer
components of the ledge cover mayhave been
slipped into each other for packaging purposes.
b. Slide the exterior ledge cover into the interior
ledge cover and center. Make sure the anchor nut is
aligned with the hole.
(Images 7 & 8).
5
6
Important Note:
We suggest that you install all the top ledges on the
wall before attaching them.
7 8