ROUND Pools V35027, Installation Manual

Page: 25 / 37

1
No Diving or Jumping. Observe all Safety Rules
A. INSTALLATION OF THE UPRIGHTS
GENERAL INSTRUCTIONS - ROUND POOLS
ASSEMBLING THE POOL FRAME
Section
4
1. Install the uprights
a. The wall joint is hidden behind the upright on most
pools. This assures that the skimmer and skimmer
return holes are not obstructed.
b. Insert an upright into the bottom plate. Ensure that
the upright is correctly inserted into the bottom
plate.
(Image 1)
c. Please note that the holes meant to receive the
ledge cover are placed asymmetrically. This means
that the holes which are at each extremity of the
upright are not placed at the same distance from
each extremity of the upright.
d. Using two (2) (V12x34) screws attach the bottom of
the uprights to the bottom plates.
(Image 2)
Proceed with the installation of the uprights
See Diagram:
Please refer to your pool’s footprint (Section 1, last page)
for gap measurement.
Important Note:
Use the ridges in the pool wall to make sure the upright
column is straight up and down.
Important Note:
Ensure to leave a gap between the two bottom rails.
2
1