12
13
14
12 & 13. Once in the open position double check the clamp engagement to the side rail and tighten. Test the
cover again for proper operation, adjust as needed, then tighten the star knobs.
of the truck bed. This can be done by placing the tube behind a bed liner, through an existing hole in the
bed, or by drilling a 5/8” hole in the bulkhead
or bed floor.
Note:
If you choose to place the tube behind your bedliner, be sure your drain holes in the bed are not clogged.
Note:
If you choose to drill holes, check to make sure the area is free and clear of any obstructions below/
behind the bed. Be sure to clean up metal shavings.
Page
5 of 7
