Rottler P69AHD Operation And Maintenance Manual Download Page 76

Page: 76 / 210

Section 5 Operating Instructions

P69AHD Manual

www.rottlermfg.com

5-32

Next, click on ‘Show’ and be sure to have Solids and Tool checked. The example shows what a crash

looks like in the graphics. The cutter geometry has been predefined in the software. The solid model

of the port as well as a solid model of the cutter shows the operator where there are potential problem

areas where the shank will hit the port. Before running a tool path this simulation should be thoroughly

examined.

Moving Pivot Points

If necessary you may have to move pivot points for certain cross sections if the shank of the tool is hitting

where it is not supposed to. Start by isolating the cross section where the tool’s shank is interfering with

the port. Notice the cross section is highlighted in red in the graphics and is grayed out in the tree to the

left.

Summary of Contents for P69AHD



















































































































































































































Search results

Summary of Contents for P69AHD

Reviews:

Related manuals for P69AHD

Brands by name

Popular brands

Rottler P69AHD, Operation And Maintenance Manual

Search results

Summary of Contents for P69AHD

Reviews:

Related manuals for P69AHD

Brands by name

Popular brands