Rottler H85A, Operation And Maintenance Manual

Page: 37 / 179

Section 3 Safety H85A Manual
www.rottlermfg.com
3-6
Computer and Controller System Safety
The computer and controller are located in the main rear electrical enclosure. This unit is a full computer,
running Windows 7 64 Bit operating system. Contact the factory if more information on the computer
system is required.
IMPORTANT: The computer in this machine has the ability to connect to the World Wide Web via Ethernet
or Wireless using a USB wireless (Wi-Fi) adapter. Updating the Rottler software should ONLY be done
when directed to do so by a Rottler service technician. Updating Rottler Software when not directed by
Rottler personnel will result in a non-operational machine.
The machine should be hooked up to the Internet anytime it is on. The software on the machine will
automatically connect to our server to send back useful information on machine status.
Any “IT” personnel should ALWAYS get approval from Rottler before doing ANYTHING on the
computer.
This machine is capable of causing severe injury or death. Doing any of the
following without Rottler’s direct consent may cause severe injury or death.
Do not attempt to install USB
devices in the PCI ports. These ports have high voltage and
any attempt to connect a USB device in these ports will result
in destruction of that device. There is also the possibility of
damage to the computer system of the machine.
Downloading any program or changing any Rottler or Computer settings
may cause the machine and/or software to become unstable. DO NOT
install ANY screen saver, Anti-Virus, Spyware or any type of Security software on the computer. This could
create a hazardous environment for the operator and personnel around the machine. Performing any of the
above will also result in the machine warranty being NULL and VOID.
DO NOT connect any type of external hardware to the computer via USB or
any other means. Do not install any type of Device Driver. This could create
a hazardous environment for the operator and personnel around the machine. Performing any of the above
will also result in the machine warranty being NULL and VOID.