© Rototilt Group AB
2017-01-18
1
2
English
EN
Disconnecting worktools
1. Rest the worktool on the ground, or so that it
cannot slide out of the attachment when the
quick coupler locking function is opened.
2. Move the locking button (1) and press the
switch (2). An audible warning sounds and the
light illuminates..
The directional valve for the Rototilt® quick
coupler locking function is now open. Oil flow
from the base machine is controlled in one of
two ways:
- automatically in conjunction with activation
of a function.
- manually via the foot pedal.
When Rototilt® is pressurized, the quick coupler
locking function opens hydraulically and the
indicator on the quick coupler shows that the
lock is open.
See section for quick coupler.
3. Once the locking wedge on the quick coupler
is fully open, release the worktool by carefully
retracting the bucket cylinder.
Figure 1
Figure 2.
Figure 3.
Disconnect Rototilt® from the base
machine
In some instances the base machine may be
equipped with a safety function which requires
a safety plug to be connected when Rototilt®
is disconnected. For the base machine’s quick
coupler locking function to work, the contact to
Rototilt® must then be replaced with the safety plug.
2200256_ _6361
