2200293
_5982
2016 05 02
30°-45°
English
EN
• Operate the tiltrotator to a position where the
quick coupler acquires an angle of 30°-45° in
relation to the tool’s attachment fitting (figure 11).
• Hook the quick coupler’s forward attachment
onto the tool’s front shaft.
• Lift the tool from the ground so that it hangs
freely (figure 12).
• Operate the tiltrotator such that the quick
coupler’s rear part moves down toward
the tool’s rear shaft (figure 13).
• Connect the tool as described in the Control
system operation section. Any hydraulic or
electrical connections will be connected at
the same time.
• Make sure the indicator rod is not visible.
Figure 11
Figure 12
Figure 13
Approx 30 cm
