© Rototilt Group AB
2018-04-27
Alternative
steering
inactive
ICS Direct
activated
ICS Direct
installed
EN
English
Control unit
The control unit has two diodes and is
connected to a buzzer.
The buzzer sounds in the event of a
system error and twice during start-up.
When the system works correctly, the
green diode lights with a fixed light and
the buzzer is silent.
When a system malfunction occurs the
LEDs light and the buzzer sounds in
various combinations.
See Trouble shooting ICS Direct
The control unit can be connected to a
PC for reprogramming, calibration and
detailed trouble shooting.
Lamp and decal
A lamp and decal are installed on the
right-hand console. The decal shows
alternative control is installed on the base
machine/excavator.
When ICS Direct is activated the lamp
lights.
When the operation inhibitor is activated
the lamp flashes to warn that the system
is switched off.
Valve block, wheel control
The valve block is connected in parallel
to the base machine/excavator's orbitrol
control of the hydraulic flow.
The operator controls the operation and
steering of the base machine/excavator
via the rollers and switches fitted in the
handles.
Alternative operation is only active when
the base machine/excavator’s:
• control inhibitor is deactivated
• drive mode switch is set to work mode
• and any additional drive mode switch
is set to low speed mode
2200401_ _7225
