RotoSpa DuoSpa S080, Owner'S Manual

Page: 9 / 36

9
Your Rotospa will come supplied with its own filter cartridge, suitable for the model you have
purchased. The cartridge will be packaged, but inside the filter housing. On the packaging you will
find the filter cartridges serial number printed on the label. Remove the packaging from the cartridge.
Filter cartridge replacement codes can be found on page 24 of this guide.
FITTING THE FILTER CARTRIDGE
DuoSpa Models
To fit the filter cartridge on the DuoSpa models,
begin by opening the flap on the front of the filter
housing, and inserting the cartridge as shown in
photo 1.
Once the cartridge has been inserted, place the
flow plate on top of it as in photo 2.
Now, rest the filter basket on top of the flow plate
(3), making sure the widest lip of the basket is
facing forwards.
Finally; close the flap as shown in photo 4.
To avoid any flow restriction, make sure you keep
the basket clear of debris by cleaning it with a
hose regularly.
Orbis and QuatroSpa
On Orbis and Quatrospa models, the filter cartridge has
an internal thread and simply screws into the housing.
Feed the cartridge into the filter housing, and once it is
at the bottom, rotate clockwise until it locks into
position. This does not need to be anything more than
hand tight.
With the cartridge located, insert the floating weir over
the top so that it is resting within the housing.
Again, keep the weir basket clear of debris by hosing
regularly.
1
2
3
4