RotoSpa DuoSpa S080, Owner'S Manual

Page: 30 / 36

30
Once your spa is filled with water it is essential to keep the water clean and hygienic by paying regular
attention to the water chemistry and filtration systems. Although your spas ozone generator will do
a very good job of killing bacteria and oxidising the water, this needs to be supplemented by the use
of chlorine or bromine.
CHEMICALS
Rotospa supply a wide range of chemicals to help you
maintain a healthy water quality in your spa which will
prevent corrosion of parts or scale build up through
high calcium levels.
Always ensure that you follow the manufacturer’s
instructions which will be found on the chemical
packaging. Sanitizer and PH levels should be checked
daily to maintain the correct range
.
It is important to keep the chlorine / bromine and PH
levels correct at all times. Aside from shortening the
life of components in your spa, poor water chemistry
can carry certain health risks. Make sure you
understand the guidelines for good, balanced water
and use chemicals as directed by the manufacturer.
FILTRATION
Your spa is factory set to run a filtration cycle every 2 hours and this will prove adequate to trap most
solids and debris from the water. The presence of body oils or other materials that are too small to
be removed may result in undesirable water conditions such as foaming or dull water. A product such
as chlorine shock can be purchased to rid your spa of unfilterable wastes; other products are also
available such as de-foamer, water clarifier and cartridge cleaning materials.
It is recommended regular spa users replace the filter cartridge once every 12 months with regular
cleaning.
Replacement filter codes are as follows:
DuoSpa models: FILT 0019
Orbis & Quatrospa: FILT 0020
DuraSpa models: FILT 0021
For a wide selection of genuine, Rotospa approved products; visit our convenient online shop at:
https://www.rotospa.co.uk/shop/
Maintenance