RotoSpa DuoSpa S080, Owner'S Manual

Page: 16 / 36

16
A designated filtration pump (pump 1) will automatically switch on and off as required to perform filtration
and heating functions. All pump(s) will also operate for a short period during the daily sanitise cycle. In
addition, the following manual pump controls are provided and will override automatic control.
The pump buttons are located on the right-hand side of the topside panels. The functions of the pump buttons
change depending on pump configuration, however the Pump-A button is used to control the filtration pump
(pump 1). For every press of a pump button the screen will temporarily display the selected pump state: ON,
OFF, LOW, HIGH or AUTO and then revert to the default display mode. Possible pump configurations & button
sequences are referenced in the tables below:
SV Mini 1 Pump Buttons
SPA CONFIGURATION PUMP A BUTTON AUXILIARY BUTTON
Pump 1 = 2 speed
Aux = Not Fitted
2 speed pump:
Low / High / Off / Auto
-
Pump 1 = 2 speed
Aux = Blower
2 speed pump:
Low / High / Off / Auto
Blower:
On / Off
NOTES:
1. If left ON, pumps automatically turn OFF after a 30 minute time-out period from the last button press.
2. If pump 1 is operating and heater is ON and pump is to be switched OFF, the pump will turn off after a 5 second delay
– to allow the heater to cool down.
3. In some configurations, engaging high speed on a 2 speed pump or operating multiple pumps will cause the heater to
load shed and turn OFF (even if heating is required) to keep the system within its available power supply.
BLOWER OPERATION
Some of our models feature a dedicated air blower power socket and button. The blower button is used to
toggle the air blower ON/OFF.
NOTES:
If left ON, blower will automatically turn OFF after a 30 minute time-out period from the last button press
.
LIGHT OPERATION
to turn blower ON