Smart Positioner
YT-3100
Product Manual
Ver. 1.19
32
9.3
Menu levels
The basic menu structure consists of the RUN Mode Monitor and the Configuration/Operation. The
Run Mode Monitor menu allows you to monitor the values of various variables. The
Configuration/Operation menu provides calibration and tuning, manual operation, configuration of I/O
port function, configuration and self-test of positioner, configuration of diagnostic function, and basic
information of the positioner. See below for information on how to move between Run Mode Monitor
menu and Configuration/Operation menu, and move within Run Mode Monitor menu.
Press for more than 3 seconds in Run
Mode to go to Configuration/Operation.
Run Mode Monitor
ESC
Configuration and Operation
RUN AP
Actual Position
CALIb
Calibration
RUN TP
Target Position
MAN OPER
Manual Operation
RUN dV
Deviation Value
CTRL PARM
Control Parameter
RUN IV
Integral Output Value
UP/DN
IN CFG
Input Configuration
RUN MV
Manipulator Value
ESC+UP/DN
OUT CFG
Output Configuration
RUN
TEMP
Temperature
dEV CFG
Device Configuration
GOOd
Device / Process
Status
dIAGNO
Diagnosis
RUN IN
Input Current
INFO
Information
RUN SP
Set Position
Press the button to select the lower menu of the Configuration/Operation menu. Press the ESC
button to return to parent menu after completing configuration. Pressing the ESC button anywhere in
the menu structure several times returns the user to the uppermost menu, Run Mode Monitor menu.
