Smart Positioner
YT-2600 series
Product manual
Ver. 1.30
16
3
Installation
3.1
Safety
When installing a positioner, please ensure to read and follow safety instructions.
➢
Any input or supply pressures to valve, actuator, and / or to other related devices must be turned
off.
➢
Use bypass valve or other supportive equipment to avoid entire system “shut down”.
➢
Ensure there is no remaining pressure in the actuator.
➢
YT-2600 series have two drain ports to be used for internal condensation. Please use larger drain
plug for the condensation and block other remaining port with blind plug.
Fig. 3-1: Location of drain plug according to orientation of positioner’s mounting
➢
After assembling the drain plug at the correct hole, make sure the positioner must be installed as
shown below. Otherwise, the condensation water could cause damages to PCB.
Fig. 3-2: The correct positions of a vent cover
3.2
Tools for installation
➢
Hex key set for hex socket cap bolts
➢
(+) & (-) Screw drivers
➢
Spanners for hexagonal-head bolts
Drain Plug
Summary of Contents for YT-2600 Series
