A
B
Centronik Interface - Basic Settings - Mechanical Switch Mechanism
A 5mm Allen (Hex.) key and 0.8 x 4mm flat screwdriver are
required to perform commissioning of the CK Mechanical Switch
Mechanism.
Set torque limits
A
Indicator/Adjustment Point
B
Torque Cam Clutch Screw
1) Move the valve to a mid-travel position and loosen the Torque
Cam Clutch 1.5 turns using a flat screwdriver.
2) Adjust each Torque Cam to the desired value (between min. &
max.) by moving the cam using a screwdriver on the adjustment
point.
CAUTION: Ensure the screwdriver remains perpendicular
to the switch mechanism faceplate when adjusting the
torque trip limits to avoid introducing an offset to the
set value.
A4
US
US
A4
US
A4
US
A4
A4
US
US
A4
US
A4
A4
US
13
A
Brand
