ENGLISH
17
Vibration emission value, screwdriving with impact (a
h
) ........12,0 m/s² ¦ K
h
1,5 m/s²
The vibration level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
3
Technical Data charger and battery
(B)
Battery:
Charger:
U = Voltage
U1 = Input voltage
C = Capacity
f1 = Input frequency
W = Weight
P1 = Input power
Ic = Charge current
U2 = Charging voltage
t
= Approx. charging time (90% full)
I2 = Max. charge current
Charging voltage ............................
20,75 V DC
Nc = No. of battery cells
Charging temperature .....................
0° - 50° C
W = Weight
Max. discharging temperature. .......
5° - 50° C
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
Recharge battery pack before first use!
4
Function of the Unit
4.1
Overview RO ID400
(A)
1
Square attachment for 1/2“ tools
5
Setting wheel for preselecting rotational
speed and tightening torque
2
Rotation selector switch / Transporting
safety device
6
Battery pack
3
Trigger
7
Battery pack release button
4
LED light. For working on dimly lit areas.
The LED lights light up when the machine is
switched on
8
Belt hook (attach as shown)
9
Bit depot
4.2
Start of operation
RO ID400 (fig. A):
Remove the battery pack from the machine before any adjustment or maintenance
is carried out. Before fitting the battery pack, make sure that the machine is switched
off!
Removing and inserting the battery pack:
Removal:
Press the battery pack release (7) button and pull the battery pack (5) forwards.
Inserting:
Slide in the battery pack (5) until it engages.
