8
ENGLISH
1
Intended use
Water pressure tanks are designed for supplying drills, concrete saws, cut-off grinders, etc. with
cooling and rinsing liquids, usually water.
Have the salesperson or an expert show you how to operate the device if you are working with it
for the first time.
Improper use may result in dangerous injuries and environmental damage.
You should only use other products if harmful effects on the device and endangerment of people
and the environment can be excluded. On request, we will provide you with a list of materials
used in the water pressure tank.
Not suitable for
• Combustible liquids
• Hydrogen peroxide and similar substances that give off oxygen
• Corrosive substances (certain disinfecting and impregnating agents, acids and bases)
• Liquids containing ammonia
• liquids at temperatures above 50 °C
• Solvents and liquids containing solvents
• Viscous or sticky liquids or liquids that form residues (dyes, greases)
• Use in applications for foodstuffs.
Under no circumstances should you use
• external pressure sources without original compressed air valve
• for flaming
• for storing and holding liquids
• as an eyewash.
2
Safety Notes
Only trained, healthy and rested people may work with the device.
You should not be under the influence of alcohol, drugs or medication. Children and adolescents
must not use the device. Keep the spraying devices out of the reach of children.
Wear suitable protective clothing, goggles and respiratory protection when working with hazard-
ous substances.
Avoid ignition sources in the environment.
Do not leave the device in the sun. Ensure that the device is not heated beyond the maximum
operating temperature (s. technical Data). Protect the device from frost and ammonia.
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice, on slopes and on un-
even terrain.
Repairs and modifications to the tank are not permitted.
Use only original spare parts and accessories.
We cannot assume any liability resulting from the use of third-party parts.
When pumping, always observe the pressure gauge to ensure that the recommended spraying
pressure is maintained (s. technical Data).
After use and before maintenance work, depressurize the device.
Transport the devices in such a way that they are protected against damage and overturning.
