ENGLISH
9
3
Technical Data
Max. filling amount .......................................10 l
Total contents ..............................................13 l
Max. operating pressure ..............................
Max. operating temperature .........................
Weight when empty .....................................
6 bar
50°C
5,2 kg
Gross weight max ........................................16,5 kg
Material of tank ............................................Steel with polyester coating
Technical residual quantity...........................0,03 l
Scope of delivery (
A-1
):
Tank [1] with pump [2] and spare-parts pouch [3], instructions for use [4], hose [5].
4
Function of the Unit
4.1
Commissioning
(A,B)
Assembly:
Screw the hose [5] tightly into the outlet port [7]. (
A-2
).
Note the location of the spigot [8] in order to be able to insert the lock.
Insert the lock [9] (
A-2
).
The lock closes and the hose is secured from unscrewing out of the tank.
Checks:
Visual inspection: Are tank [1], pump [2] and hose [5] undamaged? (
A-1
)
Pay special attention to the connections between the tank – hose and to the condi-
tion of the pump thread and hose.
No leaks:
Pump up the empty device to 2 bar. The pressure must not decrease more than 0.5 bar
within 30 minutes.
Function:
Pull the red button on the safety valve [10]. (
B-3
). The pressure must dissipate.
Have damaged parts or parts that do not work properly repaired immediately
by our customer service department or by service partners authorized by us!
Making preparations:
Observe the instructions in the section entitled „Safety“. The device must be
in an upright position. If filling the tank from a water line, ensure that the line
or a hose does not project into the tank!
Pull up the red button on the safety valve [10] until all excess pressure is released from the
tank (
B-3
)
Press the pump handle [11] down and turn it counterclockwise. The pump handle is locked
in place. (
B-4
)
Unscrew the pump [2] from the tank [1]. (
B-5
)
To ensure the pump remains clean during storage, we recommend you attach the pump [2] to
the pump holder [6]. (
B-6
)
Add the liquid to the tank [1]. (
B-6
)
Check the level [13] on the hose [5]. (
B-7
)
All excess pressure must be released from the device!
