Before Use
30
GB
Connecting the gas heater to a gas cylinder
• Connect the pressure regulator to
the gas cylinder (Note: left-handed
thread).
• Tighten the connection by hand.
• Tighten the connection only using
an appropriate wrench.
• On the gas heater, remove the red
protective cap on the connection
for the gas hose by turning it
clockwise.
• Connect the gas hose to the gas
pressure regulator and to the
connection
3
on the gas heater
(left-hand thread).
• Tighten the connections using a
wrench.
• Open the gas cylinder.
• Check if all connections are tight (e.g. using a leak detector spray) and, if
necessary, tighten the connections. Do not use the gas heater if you suspect
a leakage.
• The gas heater is now ready for use. Now close the gas cylinder if you do not
want to use the gas heater immediately.
Proceed as follows to connect the gas heater to a gas cylinder:
• Make sure that the gas cylinder valve as well as the gas regulator knob
2
of
the gas heater are closed.
• Check the condition of the gas hose
10
and the gas pressure regulator
9
before every use. Do not use a hose or a pressure regulator that show any
signs of deterioration.
2
3
9
035985_Anleitung_DE_GB_FR_IT.indb 30
035985_Anleitung_DE_GB_FR_IT.indb 30
29.04.2020 17:10:10
29.04.2020 17:10:10
