5
IMPORTANT INFORMATION
1
1.3 Target Groups
1.4 Intended Use
1.5 Use for an Unauthorized Purpose
1.6 Product Standards, Safety Regulations
This operating manual is intended for the personnel planning, operating and maintaining standard,
two-stage, Rotary vane pumps.
This group of people includes:
•
Designers and fitters of vacuum apparatus
•
Employees working on commercial laboratory and industrial vacuum technology applications
•
Service personnel for Rotary vane pumps
The personnel operating and maintaining the Rotary vane pumps must have the technical competence
required to perform the work that has to be done and understand the hazards involved. The user must
authorize the operating personnel to do the work that has to be done. The personnel must have read
and understood the complete operating manual before using the Rotary vane pumps.
The operating manual must be kept at the place of use and be available to the personnel when required.
The layout of the rotary vane pump must be appropriate for the conditions of use.
The user bears the sole responsibility for this.
The rotary vane pump may only be operated under the conditions stated:
•
In the “Technical Data” chapter
•
On the type plate and
•
In the technical specification for the order concerned
It is forbidden to use the pump for applications deviating from the technical data stated on the type plate,
in the operating manual or the conditions stated in the supply contract, or to operate it with missing or
defective protective devices.
The ROTILABO
®
CR-DS 40 standard pumps are not suited for pumping liquids.
Observe the standards and regulations applying in your country when you use the rotary vane pump.
Hot surface which may lead to serious injuries or material damage.
THE ROTARY VANE PUMP MEET THE FOLLOWING PRODUCT STANDARDS:
ONLY RELEVANT
FOR CE (220-240V /
50HZ ) OPERATION
EN 60204-1
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
