Roth Brackets and Part Numbers
Unpacking
The Roth Hose Reel Bracket is packaged in a corrugated box with (4) mounting clips, (4) bolts and stop nuts (fig 1).
Inspect package upon receipt for any damage or missing components and contact shipper with any damage claims.
Pump bracket installation on tank top
A) Tools required: 7/16” end or socket wrenches Fig 2
B) Remove dust cap from the 2” FPT adapter supplied with the tank Fig 3
C) Install pump bung adapter (by pump manufacturer) in the 2 inch metallic FPT adapter Fig 4
D) Place bracket over the tank opening selected for installation of the pump. Be sure that the bracket legs engage the
inside edges of the tank top lip and that the bracket openings are aligned with the connections on the tank Fig 5
E) Insert the threaded fastener through the bracket leg from the inside. Fig 6
F) Install the mounting clip over the fastener with clip engaged with tank lip and start the nut Fig 7
G) Mounting clip fasteners can be partially but not fully tightened at this point, this will allow for centering of the
pump in the tank
opening.
V.1.20.2017
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Flanged Pump Brackets
Part #
Flanged Pump Bracket #1 (use with 400L, 620L, 1000L)
2315000204
Flanged Pump Bracket #2 (use 1000LH)
2315000205
Flanged Pump Bracket #3 (use with 1500L)
2315000206
Threaded Pump Brackets
Part
Threaded Pump Bracket #1 (use with 400L, 20L, 1000L) 2315000207
Threaded Pump Bracket #2 (use 1000LH)
2315000208
Threaded Pump Bracket #3 (use with 1500L)
2315000209
