background image

10

User manual

Split wall air conditioner - VERSU W

PART 2. OPERATING THE DEVICE

 

  

REMEMBER

1.  The device will achieve the highest efficiency in the above temperature ranges. If the air conditioner 

operates at temperatures outside the above mentioned range, some safety functions may be 
activated, causing the device to operate unnaturally.

2.  If the air conditioner is used for a long time in an environment with high humidity (exceeding 80%), 

water droplets may drip. In this situation, it is recommended to set the maximum opening angle of the 
vertical blinds (vertically to the floor) and start the fan at high speed (HIGH).

4. MANUAL OPERATION OF THE DEVICE

The indoor units have a button to control the device during a remote control failure. You can get to it by 
opening the front panel. The button should only be used if a wireless remote control fails or needs service.

AUTO/COOL

Control button

manual

Control button

manual

AUTO/COOL

Bracket

 

  

REMEMBER

Turn off the device before using the manual control button. If 
the unit is in operation, press the manual control button until 
it turns off.

1.  Open and lift the front panel until you hear a click indicating 

that the panel is locked. For some models, use the bracket 
supporting the panel.

2.  Pressing the button once will cause the unit to start in cooling 

mode. Pressing the button twice will start the heating mode, 
and pressing the button three times will turn off the unit.

3.  Close the panel.

 

 

ATTENTION

The button should only be used in an emergency. To return to the 
remote control, simply start using it again.

Summary of Contents for VG26W





























Reviews: