23
English
Specifications
[Amplifier section]
Continuous Power Output
(20-20khz,<0.3%,80ohms)
2x100 watts
Total Harmonic Distortiion
(20-20khz,80ohms)
<0.2%
IM Distortion
(at rated power 60Hz:7kHz=4:1)
63 dBf (mono)
Input Sens. / Impedance (AUX2)
200mV / 47 Kohms
Input Overload Level (AUX2)
2.5V
Frequency Response (AUX2)
10 - 40 kHZ (±3db )
S/N Ration (IHF A) ( AUX2)
92 dB
[PREOUT section]
Output level/Impedance (AUX2)
1 V / 1K ohm
Total Harmonic Distortion
0.006%
Frequency Response (AUX2)
10 - 110 kHZ (±3db )
S/N Ration (IHF A) ( AUX2)
90 dB
[FM Tuner section]
Usable Sensitivity
22.2dBf
50dB Quieting Sensitivity
27.2dBf
Signal to Noise Ratio (at 65 dBf)
63 dBf (mono), 60 dBf (stereo)
Harmonic Distortion (at 65 dBf)
0.2% (mono), 0.3% (stereo)
Frequency Response
10 Hz-15kHz, ±3dB
Stereo Separation
(100Hz/1kHz/10kHz)
40dB/45dB/35dB
Output level
(at 75KHz )
1.1V (at Volume 82)
Antenna Input
75 ohms unbalanced
[DAB Tuner section]
Sensitivity
-80dBm
Tuning Range
Band III (174-240MHz)
Audio Data Rate
224Kbps (Max)
Frequency Response
20 - 20KHz (± 1.0dB )
Output level
(at 0dBfs )
1.1V (at Volume 82)
Antenna Input
75 ohms F connector
[Audio USB/AUX1 section]
Signal to Noise Ratio (IHF-A)
90dB
Total Harmonic Distortion
(at 0dBfs )
0.2% 0.0045% at 1KHz
Frequency Response
20 - 20KHz (± 0.5 dB )
Channel Balance
± 0.5 dB
Phase Linearity
± 0.5 degree
Channel Separation
90dB at 1KHz
Signal to Noise Ration
100dB
Dynamic Range
96dB
Digital to Analog Converters
Wolfson
Output Level
(at 0dB )
2.2V (at Volume 82)
[General section]
Network connection
802.11b/g
Security
WEP, WPA1 (TKIP)
WPA2 (TKIP)
File formats
Real Audio, MP3, Windows
media stream, OGG
vorbis,AAC, WAV, AIFF and
AU.
Power consumption
140 watts
Power Requirements (AC)
120V, 60Hz(USA)
230V, 50Hz(Europe)
Weight (net)
8.1 kgs
Dimensions (W x H x D)
391 x 144 x 343 mm
(17
1/4
x 3
5/8
x 13”)
Front panel height
132.6 mm, (5
1/4
”)
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.
Tokyo, Japan.
90
25
“
Made for iPod” means that an electronic accessory has been designed to
connect specifically to iPod and has been certified by the developer to meet
Apple performance standards.
“Made for iPhone” means that an electronic accessory has been designed
to connect specifically to iPhone and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
iPhone is a trademark of Apple Inc.
Windows, Windows XP, Windows 2000, Windows Vista, Windows
7, Windows Media are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
“This product includes technology owned by Microsoft Corporation and
under a licence from Microsoft Licensing GP. Use or distribution of such
technology outside of this product is prohibited without a license from
Microsoft Corporation and/or Microsoft Licensing, GP as applicable.”