Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
101
DISPLAY INFORMATION
o
This chapter will instruct you on the information shown on the screen and the
solutions.
Causes
Solutions
If the water drip tray is full, any
beverage-making function will be
out of service.
Take the drip tray out, empty the
waste water out of the drip tray
and reinstall it into the machine.
If the coffee grounds container is
full, any beverage-making func-
tion will be out of service.
Take the coffee grounds con-
tainer out, empty the coffee
grounds container and reinstall it.
If water in the water tank is used
up, any beverage-making func-
tion will be out of service.
Fill the water tank with water.
If coffee beans in the bean con-
tainer are used up, the coffee-
making function will be out of
service.
Add beans into bean container,
and press any button to release.
There is not enough coffee pow-
der in the powder container.
Next time when making coffee
with coffee powder, please put in
a full spoon of powder.
The drip tray is not installed cor-
rectly; any function is out of ser-
vice.
Install the drip tray correctly.
There is not enough water in the
pipe inside the machine; any
function is out of service.
Press any button to release to run
the water self-check system.
Temperature of the machine is
too high, the machine cannot be
used.
Power off the main power, and
use it 1 hour later.
Temperature of the machine is
too low, the machine cannot be
used.
Increase environmental tempera-
ture.
1. Line closing; 2. Using dark
roasted coffee beans or over-fine
coffee powder; 3. The filter of the
brewer is clogged.
1. Press any button to release to
run the self-check system; 2. Ad-
just grinder wheel to coarser; 3.
Start brewer cleaning procedure.
Internal parts stuck.
Press any button to run the self-
test system.