Rotax 125 MAX DD2 evo, Installation Instructions And Operators Manual

Page: 110 / 120

BRP-Rotax
Operators Manual
MAINTENANCE SCHEDULE FOR ENGINE COMPONENTS
ATTENTION
Non-compliance with the specified maintenance schedule could result in engine
damage.
FREQUENCY NOTES
ENGINE Before
every
opera-
tion After
every
opera-
tion Every
2
hours
of op-
era-
tion Every
5
hours
of op-
era-
tion Every
10
hours
of op-
eration Every
50
hours
of op-
era-
tion
Check oil level in
gearbox X
Exchange oil in gearbox after first 5 hours of op-
eration, then inspect
the oil every 5 hours
and change it if
necessary
Clean exhaust valve and
check if moving freely X
Check overflow bottle,
empty if needed X
Tear-down inspection of
engine (must be con-
ducted by an authorized
ROTAX® Service
Center) X Inspect following com-
ponents and replace if
requested: piston, pis-
ton pin and piston pin
bearing, conrod and
conrod bearing, main
bearings of crankshaft.
Clean airfilter, apply oil,
replace in case of visible
damage X after each rainy ses-
sion, use air filter
cleaner kit
Visually inspect connec-
tions between engine
and carburetor and check
fit and tightness of intake
silencer X right after every
collision
Visually inspect fuel filter
regarding dirt, replace if
needed X
Replace fuel filter X
Effectivity: 125 MAX DD2 evo 4
Page 9
Edition: September 01 2019