D
1: Insert the angle adjustment piece into the
clamp base in the orientation shown.
E
2: Once located, this is how your clamp
should look. Ensure the holes are running
parallel to the edge indicated.
Parallel
Before proceeding to step F, view the images below
to know how your clamp and swivel adapter will look
once assembled depending on which side it will be
installed on.
F
Determine which size plastic inserts you require
to mount your rack to your tower. Insert the
appropriate size plastic inserts into the clamp
halves being sure to line up the set screw hole
in the plastic with the set screw hole in the top of
the clamp.
G
2” inserts
2.5” inserts
x2
x2
Set screw hole
5/16”
THREADLOCKER
x3
x1
Assemble the swivel adapter to the clamp
with the bolts provided. Be sure the plastic
spacer is sandwiched between the clamp
and the swivel adapter.
***IMPORTANT***
The swivel adapter has the word “TOP”
Marked on it. This must face up for final
installation. The Lip of the clamp must face
out for final installation.
Must face up
Plastic spacer
Clamp lip
Torque bolts
to 25ft-lb
Port Configuration
Starboard Configuration
4
Bennington Board Rack Assembly Instalation
www.roswellmarine.com
