The
GlobalCruise
is a microprocessor based Cruise Control. It is designed for ease of
installation and can be used with most cars, light trucks and vans. Carefully follow the
installation procedures in this manual for best results.
DO NOT INSTALL THIS SYSTEM ON A DIESEL POWERED VEHICLE WHICH HAS A
MANUAL TRANSMISSION WITHOUT A DISENGAGEMENT SWITCH
(Kit# 250-4206)
ON
THE CLUTCH PEDAL ASSEMBLY.
Your vehicle must have a
VSS
(Vehicle Speed Signal)
wire or an available signal generator
for installation of the
GlobalCruise.
Please consult vendors application guide.
Throughout the instructions there are
WARNINGS, CAUTIONS,
AND
NOTES
that are
meant to make it easier for you to install the
GlobalCruise
on your vehicle and make it
safer to use. We have gathered these tips from people across the country who have
informed us of their problems and solutions. Even with all these reports from the field, we
cannot cover every condition which you might encounter, there are just too many different
vehicle makes and models. We do our best to tell you how to handle most vehicles, but we
must
Depend on Your Good Judgement
for dealing with the rest.
Therefore, we believe you can understand why we
strongly
urge you to think carefully
about what could happen to you, your passengers, and your vehicle if you use any tools,
parts, fastening methods, routing or procedures which are not described in this manual.
There is
NO
drain on the battery if the control switch is left on. The
GlobalCruise
needs
no regular service.
WARNING
Failure to follow the instruction manual could not only cause the
GlobalCruise to work improperly, but could cause the throttle to hang
up, possibly causing damage to your vehicle and injury and/or death to
you and your passengers.
WARNING
If you question the applications of the GlobalCruise, please consult the
applicable application guide. Only install on approved applications.
S
AFETY
P
ROCEDURES
Page 2
