•
It may take up to 4-8 weeks before the full results of the ROSSWAN
PURE treatment can be seen. The hair will continue to grow up to two
weeks after a hair reduction session. However, thereafter as the hair
grows in three different stages the hairs will naturally and gradually fall
out depending on the hair growth stage in during which the treatment
was done (only hairs in the active growth phase will be affected). Some
hair may not be affected by the ROSSWAN PURE device because of
the different hair growth phases. To remove this hair multiple
treatment sessions are required to reach the desired result.
•
The number of sessions required for achieving long term results is
different for every treatment area and changing for every user, as it is
effected by type of skin hair and hormonal changes. Maintenance will
be needed from time to time if growth is still visible.
Taking Care of Your ROSSWAN PURE
The ROSSWAN PURE
doesn’t require special care, but we do
recommend that you keep it clean, especially the treatment window.
Cleaning instructions
Make sure that the ROSSWAN PURE is turned off and unplug the
power supply from the ROSSWAN PURE and the power outlet.
To clean the ROSSWAN PURE, moisten a soft cloth with water and
mild soap, and wipe the treatment window and the exterior of the
device. Be careful not to damage the treatment window. Allow to dry
completely before turning on your ROSSWAN PURE
DO NOT get the ROSSWAN PURE wet. If it gets wet, DO NOT use the
ROSSWAN PURE.Performing a treatment with a wet ROSSWAN PURE
can cause electrocution or electric shock.
29
