1.
Select the lowest level and deliver a pulse on the selected
preliminary test skin area.
2.
If you feel comfortable with the energy level, increase it to level 2
and perform an additional pulse on the next spot.
3.
Only if you feel comfortable, you may reach the maximum energy
level of 9.
4.
Stop the test once you do not feel comfortable, as increasing the
energy level increases the risk of adverse effects.
5.
If you see adverse effects such as severe redness or blistering - stop
the test immediately.
6.
Wait 48 hours and examine the tested area.If the skin in the test area
seems normal (no response or mild redness observed), you can
proceed with a full treatment in the highest comfortable energy level
that you have tested. If you see extreme redness, swelling, or blistering
even at the low-energy level settings, do not perform a full treatment
in that area.
*Note:
•
Do not treat full areas with energy levels that you have not tested
before!
•
Do not treat the tested area for at least 48 hours after the preliminary
test is done.
*NOTE:
A preliminary test should be conducted before proceeding to a full
treatment. See “Preliminary test section” above.
21
