5. SEAT
First please remove the M8 flat washers (75), M8
nylon caps (76) and towel rack (74) which are
pre-assembled on the back of the seat (73) with
the multi spanner.(2-A)
77
81
73
74
75
76
77
2-A
Then insert the three poles on back side of the
seat (73) into the triangle-hole of the top seat
support tube (77); slide the towel rack (74) first
and then use M8 flat washer (75) and M8 nylon
cap (76) to lock them up.(2-B)
.
Insert the seat support tube (77) with saddle into
the seat tube cushion; set the height the tube as
your wanted level and screw the seat knob (81)
clockwise. (Very important: since the seat tube
#77 can move freely inside the cover therefore it
must be inserted by the seat knob #81 and
locked firmly with with the main farme!)
You can set the seat height of by changing the lock
position of the tube and the tube knob (81) ( 2-C)
2-B
81
Up
Down
2-C
58
Summary of Contents for 021054
Page 69: ...69...
Page 75: ...Vue g n rale...
