Rosslare SP-03V2, User Manual, Page: 44 / 50

Emergency and Panic Functionality
SP-03V2 User Manual Page 43
The system responds to the panic event regardless of the
systems arming condition. Once a Panic alarm has been
entered, the system can be reset by disarming.
To reset the system by disarming:
1. Press . A prompt to enter the code is heard.
2. Enter the code. The code being entered is indicated by
“*”.
8.3 Entering the Duress Code
The SP-03v2 system provides a duress code function that is
used to disarm the system when it is under threat. The specific
and unique code is defined during installation and given to the
user to memorize.
Once entered, the system immediately reports a duress
situation (Contact ID)—without entering the alarm mode or
activating the sounder and outputs. The silent alarm
generated acts as an ‘Ambush’ to report that the user is being
forced to disarm the system.
When the system receives a Duress alarm from the panel, the
system sends a DURESS alarm report to the central station and
to private phone numbers as defined, however no alarm is
sounded.
8.4 Enabling Forced Hang up
In an emergency a telephone call can be forcibly terminated
to allow for emergency options to be made available.
By default this feature is disabled.
To enable forced Hang Up:
1. Press . The Master Menu option is
displayed.
2. Press . The code prompt is
displayed.