Rosslare SP-03V2, User Manual, Page: 37 / 50

Security Panel Behavior and Modes of Operation
SP-03V2 User Manual Page 36
either upon disarming or once the zones are closed or
supervised (again) during the arming period.
The system acknowledges this condition by indicating a bypass
state when armed.
Depending on how the feature is defined during setup, a
report can be sent to the central station.
By default Forced Arming is disabled and is enabled by the
installer during system setup.
7.2.5. Quick Arming
Setting this parameter ON allows AWAY arming without code
entry. The system does not accept home arming when already
armed AWAY. When Quick Arming is enabled (during setup), a
long press on the AWAY arming button on the panel activates
Quick Arming.
By default Quick Arming is OFF and is set to ON by the installer
during system setup.
7.3 Disarming Process
Users can disarm an armed system by entering their code using
the panel, or using an RF keys/remotes.
Disarming causes the system to function as follows:
•
Disarming a system both disarms it and stops an alarm
condition.
•
When an alarm condition occurs during the disarming
process, the system triggers a full alarm. The alarm stops on
the next disarming operation.
To disarm the system:
1. Press . A prompt to enter the code is
heard.
2. Enter the code. The code being entered is
indicated by “*”.
3. The system is disarmed.