Rosslare SP-03V2, User Manual, Page: 41 / 50

Security Panel Behavior and Modes of Operation
SP-03V2 User Manual Page 40
3. Using the numeric keypad enter a valid user or master
code. While entering the code each number entered is
indicated by an "*".
If the incorrect code is entered, the system announces
"Illegal Code" and displays "Wrong Code, Please Try Again".
If there is no activity for 10 seconds, the system returns to
normal operating mode.
4. Press until the BYPASS OPTIONS
screen is displayed.
5. Press and to toggle
between the bypass options until the SET
ACTIVATION is displayed.
6. Press . The screen to select
the zone to be activated is displayed.
7. Press and to toggle
between the zones to activate or by
entering the zone number 01 - 16. Press
to select the zone.
8. Press until the standard
screen is displayed and the system returns
to normal operating mode.
Note:
If the system is armed the Bypass indicator and the
bypassed zones flash briefly before entering the armed
condition.
7.5 Entry/Exit Delay Options
Entry and Exit actions delay the alarm mode and allow the
system to ignore zone violations, as described below.
7.5.1. Entry Delay
Entry delay allows the user time to open the door and reach
the panel to disarm the system.