Rosslare SP-03V2, User Manual, Page: 38 / 50

Security Panel Behavior and Modes of Operation
SP-03V2 User Manual Page 37
7.4 Bypass/Un-bypass Zone
The SP-03v2 system can be set to enable or disable zone
bypass. In auto bypass, the system functions as follows:
• If disabled (default) and zones are opened (doors,
windows) or unsupervised, the system does not allow
arming until all zones are closed. All incoming detections
are handled according to the selected alarm options for
zone type and setting.
•
Each zone can be set as bypassed. The system ignores
incoming detections from a bypassed zone, and is able to
arm regardless of their condition.
•
Zone bypassing behavior is dependent on the general
system bypass enable setting.
7.4.1. Setting Zone Bypass
When the system is installed, the secured area is divided in up
to 16 security zones. Each zone is set by the person installing
the system.
When arming the system certain zones can be bypassed. This is
used to deal with various situations, such as when the sensor
battery is low and sends an event, or when the system is armed
while someone is still on the premises.
Note:
This feature is available to User and Master level users,
and is only active if it is enabled by the installer.
Up to 16 zones can be bypassed when arming the system.
To define the bypass zones:
1. Press . The Master Menu option is
displayed.
2. Press . The code prompt is
displayed.