Page 5
08/05
BL--D40
07/04
Technical Specifications
Electrical Characteristics
Environmental Characteristics
Mechanical Characteristics
Operating Voltage Range:
Maximum Input Current:
Audio Output
LED Strobe Output
Operating Temperature:
Operating Humidity:
Dimensions:
Weight:
16V to 24V AC
From a transformer
12V to 24V DC
From a Regulated Power Supply
(Linear type recommended)
(at 12 Volts)
Standby: 11mA
Not including attached devices
Max: 100mA
Not including attached devices
Three types of audible output
1) Bell
2) Door Chime
3) Siren
-25 F to 145 F (-31 C to 63 C)
0 to 95% (Non-Condensing)
4.80" (122mm) L x 2.95" (75mm) W x 0.94" (24mm) D
0.26 lbs (120g)
Page 4
BL-D40
Installation
Installing the BL-D40 with a Rosslare Controller
Mounting the BL-D40 External Sounder
Wiring the BL-D40 External Sounder
1)
2)
3)
4)
5)
The BL-D40 should be located nearby the door and controller
it is to be attached to, where it can be heard, and where the
strobe can be seen.
The BL-D40 is designed to be easily mounted to a US Gang
Box. Remove the Bezel Screw. (Use the diagram on Page 3
to help you locate the Bezel Screw)
Screw the BL-D40 onto a US Gang Box through the two
Mounting Holes provided. (See diagram on Page 3 to help
you locate the mounting holes)
Attach the wires to the BL-D40 terminal blocks as shown in
the wiring diagram on the next page.
Replace the BL-D40 bezel and replace the factory default
screw with the security screw that is provided in the
Installation Kit. A security screw tool is also provided in the
Installation Kit.
It is recommended that 22 Gage wire should be used between the
BL-D40 and the Controller.
See the next page for the wiring diagram.