Page 3
07/04
BL-D40
Page 2
07/04
Contents
Introduction & Key Features
Key Features
2
Technical Specifications
4
5
Mounting the BL-D40 External Sounder
5
Wiring the BL-D40 External Sounder
5
7
INTRODUCTION & KEY FEATURES
INSTALLATION
TECHNICAL SUPPORT
8
2
5
With a compatible Rosslare Controller
Using the BL-D40 as a stand alone Door Bell
The BL-D40 External Sounder is compatible with all Rosslare
Standalone Controllers. It is designed to operate indoors and
installed within the premises to be secured. The BL-D40 can be
powered by 12V to 24V DC from regulated power supply or 16V to
24V AC from a transformer.
The BL-D40 is capable of emitting four different types of alerts both
audible and visual; Bell, Door Chime, Siren, and Strobe Light.
The Bell always sounds when the controller's doorbell button
is pressed.
The Door Chime can be programmed to sound whenever the
controller unlocks the door (the Door Chime does not sound
when the REX button is used to open the door).
The Siren can be programmed to sound when the case of the
controller is opened or when the controller is removed from the
wall. The controller can also program the length of the Siren of
the BL-D40.
1)
2)
3)
BL-D40
4)
The LED on the BL-D40 will turn ON when there is a Bell or Door
Chime. If there is a siren it will flash as long as the tamper switch
is activated / opened.
The controller communicates with the BL-D40 using a coded
proprietary Rosslare communications protocol. This provides a
more secure link between the Controller and the BL-D40. If the BL-
D40 receives any unrecognized codes on its communication line or
communication between the controller and the BL-D40 is severed,
the Strobe will flash repeatedly until the communication problem
has been resolved.
See the diagram below to become more familiar with BL-D40's
features.
Bezel Screw
Mounting Hole
Mounting Hole
Terminal Blocks
R
E
X/B
L
Lock
(-)
+)(
Speaker
Strobe (L.E.D)
