Controller Functionality
38
AYC-x6355 (Rev. B) Installation and User Manual
Secure
A Secure user must have a Primary and Secondary code
programmed; the two codes cannot be the same. The Secure
user can gain access when the unit is in any of its three modes of
operation. In Normal mode, the Secure user must use the Primary
code to gain entry. In Secure mode, the Secure user must present
both the Primary and Secondary codes to gain entry.
Master
A Master user must have both Primary and Secondary codes
programmed with the same PIN code. The Master User can gain
access during any mode of operation by presenting the PIN code
and/or proximity card one time to the controller. (The Master user
is convenient but is less secure than a Secure user.)
7.2
Modes of Operation
There are three modes of operation:
7.2.1
Normal Mode
The left LED is green.
Normal mode is the default mode. In Normal mode, the door is
locked until a Primary code is presented to the controller. Special
codes such as Lock Strike code
and Auxiliary code
are active in Normal
7.9.4 for more information on the Lock
Strike and Auxiliary codes.
7.2.2
Bypass Mode
The left LED is orange.
In Bypass mode, access to the premises is dependent on whether the
controller's Lock Strike Relay is programmed for Fail Safe Operation or
Fail Secure Operation. When the Lock Strike is programmed for Fail
Secure Operation, the door is locked until * is pressed. When the Lock
Strike is programmed for Fail Safe Operation, the door is constantly
unlocked. In Bypass mode, programmed user codes still function.
Green
Orange
